CDP-TW 3000-BSY+
-
Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101‑2; and for daily ventilation
-
With BSY+ motor and synchronised electronics controlled via microprocessor
-
High‑speed function (HS) for especially fast opening windows in case of fire (SHEV)
-
Option of up to 2 drives in one synchronous group
-
Symmetrical chain outlet for easy installation
-
Relief of pressure on window gasket after closing process
-
Programmable drive functions and different drive parameters
-
Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection)
-
Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection)
Approvals / Certificates
These products are also available with the following approvals:
Find out about permission details from your D+H Partner.
Designs and technical data
| CDP-TW-BSY+ | CDP-TW 3000-BSY+ | |
|---|---|---|
| Supply | 24 V DC / ±15 % / 8 A Configurable | |
| Duty cycle | Variable designs possible | 30 % (ON: 3 min. / OFF: 7 min.) Configurable |
| Force of pressure | 3000 N Configurable | |
| Tensile force | 2000 N Configurable | |
| Nominal locking force * | 6000 N Configurable | |
| Service life | > 10000 double strokes Configurable | |
| Stroke | Configurable Configurable | |
| OPEN running speed | 6 mm/s Configurable | |
| OPEN running speed - SHEV | 17.7 mm/s Configurable | |
| CLOSED running speed | 6 mm/s Configurable | |
|
Show more information
|
||
| Request & Compare |
CDP-TW-BSY+ |
CDP-TW 3000-BSY+
|
| Configure now | ||
* Depending on the mounting, ** in accordance with VdS 2580
Instruction for use
7.06 MB
CAD drawing
445.88 KB
581.40 KB
1.19 MB
Tender documents
CDP-TW 3000-BSY+
The matching bracket for CDP-TW 3000-BSY+
Notice: This product recommendation is based on the available and limited data and filter options. To determine a suitable installation solution, further information on the installation situation, the window profile and the usage requirements is necessary. For the specific selection of a suitable bracket for installing to the window, use our myCalc configuration tool or contact our project consultants directly and personally for planning support.
