SALES | D+H MECHATRONIC AG

CPS-M Series   MSE control panel - modular

CPS-M1-MSE

  • Variable modular technology for complex position requirements

  • Flexible system design thanks to the supporting rail assembly for all modules and additions

  • Supply connection and communication using integrated plug connectors

  • Components can be retrofitted in case of building modifications

  • Configurable MSE and ventilation functions via D+H SCS software

  • Inputs and outputs monitored for line breakage and short circuit  

  • VdS-approved AdComNet bus system for seamless networking of the modules within the CPS-M and other D+H AdComNet components 

  • Can be connected to other bus interfaces (Modbus, KNX and BACnet)

  • Flexible use of configurable, digital inputs and outputs

  • 24 V DC:
    - 2x max. 10 A drive current per actuator module
    - Stabilised output voltage thanks to power pack technology
    - No signal loss in case of mains outage thanks to integrated emergency power supply (72 h)

  • 230 V AC:
    - VdS-approved emergency power supply (72 h)
    - Option to connect up to 45 drives (230 V AC) per drive group (1840 VA)

  • 400 V AC:
    - Selection of fan actuation by inverter, soft starter or directly
    - Supply via main switch and with automatic switching to mains supply if necessary


Content of this page:

Designs and technical data

CPS-M1-MSE
Supply 400 V AC / 50 Hz
Output 24 V DC / 230 V AC / 400 V AC
Ripple < 50 mVss at 24 V DC
Mode of operation monitoring Pulse operation
Type of protection IP 54
Temperature range -5 °C … +40 °C
Housing Steel sheet
Remark Variable equipment possible
Art. No. 31.700.02
Request & 
Compare

Add to comparison list / Remove from comparison list
Request

Batteries must be ordered separately.

Instruction for use
7.41 MB
Tender documents
CPS-M1-MSE