Course catalogue
Log in to your D+H Academy account to complete one of the courses.
If you do not have an account yet and are interested in one of our courses, you can request one by sending an email to schulung@dh-partner.com.
To the AcademyIn order to enable certain properties and behaviour of BSY+ drives, they can be configured, if required. This course explains what BSY+ drives are and how stroke, shutdown forces, speed and synchronous operation can be set.
Completion rules:
- You must complete the test "Test Configuration BSY+ drives"
- Leads to a certificate with a duration: 2 years
Content:
- Configuration BSY+ drives
- Test Configuration BSY+ drives
In order to enable certain properties and behavior of PLP drives, they can be configured, if required. This course explains what PLP drives are and how stroke, cut-off forces and speed can be adjusted.
Completion rules:
- You must complete the test "Test PLP drive configuration"
- Leads to a certificate with a duration: 2 years
Content:
- Configuration PLP drives
- Test PLP drive configuration
The CPS-B is an RWA control with ventilation function. It is mainly intended for use in stairwells. In this course you will learn everything about the installation and configuration of the CPS-B.
Abschlusskriterien:
- All units must be completed
- Leads to a certificate with a duration: 2 years
Content:
- CPS-B beginner course
- CPS-B beginner couse test
Beginner course for the CPS-M
Completion rules:
- You must complete the test "CPS-M Beginner Course Test"
- Leads to a certificate with a duration: 2 years
Content:
- CPS-M Beginner Course
- CPS-M Beginner Course Test
Advanced course for the CPS-M
Completion rules:
- You must complete the test "CPS-M Advanced Test"
- Leads to a certificate with a duration: 2 years
Content:
- CPS-M Advanced Course
- CPS-M Advanced Test
The ADM supplements the CPS-M with analog and digital inputs.
This enables ventilation functions to be implemented.
How and what exactly is possible with the ADM?
This advanced course has the answers.
Completion rules:
- All units must be completed
Content:
- CPS-M ADM Advanced Course
The drive calculation software myCalc enables the calculation of suitable D+H drives for roof and facade.
Completion rules:
- All units must be completed
Content:
- myCalc Quickstart Guide
With the new RM-GW-ETH it is possible to get a direct connection to the D+H control panel from any place in the world. Thus, parameterization, troubleshooting etc. can be carried out directly and quickly from the workstation without the need to drive to the customer.
Completion rules:
- All units must be completed
Content:
- RW-GW-ETH
