Smoke Damper
Ideal for corridor requirements, particularly within high-rise buildings
The smoke damper has been designed to satisfy smoke shaft applications and is particularly suited for fire rated mechanical smoke extraction shafts in multi-storey buildings.
-
Tested according to EN 12101-8
-
Comprises of 3 units; damper, removable sleeve and grille
Performance
-
Longevity cycle tested for 100,000 cycles
-
24V or 230V power open/motor closed actuator
-
Actuator is on lobby side, hidden from view behind painted cover plate
-
Built-in microswitches for position indication
-
Can also be used for environmental control
-
Simple to install
Technical data
| Material | Frame, sleeve and blades from galvanised mild steel. Aluminium grille. Standard PPC RAL 9010 (other colours on request) |
| Tested to | EN 12101-8, EN 1366-10, EN 1366-2 |
| Maximum duct velocity | 20 m/s |
| Maximum system pressure | 500Pa |
| Operation | 10,000 cycles |
| Sizes | From 519 x 400 mm up to 1013 x 1998 mm |
Smoke Dampers at work: Thomas Fields
Project
D+H UK supplied, installed and commissioned a new natural smoke ventilation system at Buxton Extra Care. The development facilitates people over the age of 55, containing 53 two bedroom apartments with a range of on-site amenities. It offers independent living with access to on-site care.
System
D+H UK’s system has been configured to be a “stand alone” system and will work independently from the fire alarm system. In the event of activation the system will send a signal to the fire alarm panel.
In the event of a fire
If the fire-man’s override is activated on the smoke shaft, the local damper will open along with the head of shaft and local staircase. All other dampers on the shaft will close and become locked out.
