D+H | Source:www.dh-partner.com 06.11.2025 Gateway BACnet - BACnet Modbus Gateway V2 Gateway BACnet to Modbus/ACN Performance features: High-performing gateway to establish a connection between the two protocols BACnet and Modbus. An integration of Modbus devices supporting the RTU protocol via RS-485 into BACnet controlled systems can be easily implemented via the BACnet gateway. At least 100 freely configurable data points (BACnet options) can be selected. The Modbus registers of the system to be controlled can be exported to the BACnet software in the D+H software SCS. The interpretation and scaling of the Modbus data according to the data point types of the BACnet standard, are assigned automatically. The gateway is executed as a master module. The device status is visualized by multicolor LEDs on the front panel. The Modbus connection is galvanically isolated from the BACnet bus. All connections are pluggable. Technical data: Power supply: Auxiliary voltage 9 - 36 V DC / 24 V AC Input power: Max. 140 mA Display elements: 10 LEDs, multicoloured Data channel management: Modbus-Client Modbus channels: up to 100 Modbus type: RTU (RS485) Connection cross-section: 0,5 - 2,5 mm² Connection for Modbus: Pluggable screw terminal (2x2-pole) Connection for auxiliary voltage: Pluggable screw terminal (3-pole) Type of protection: IP 20 Temperature range: 0 °C … +60 °C Housing: Plastic (UL 94 V-0) W x H x D : 90 x 88 x 56 mm Installation type: Mounting rail TS35 Weight: 0.18 kg Scope of supply: Gateway, user manual, USB-configuration cable Brand: D+H Type: BACnet Modbus Gateway V2 Art. No.: 70.602.22 Quantity: .......... psc Price: ................. GBP TP: ................. GBP Important information: This product description does not constitute a tender. The responsibility for compliance with public procurement law requirements lies with the tendering planner or architect. Installation and commissioning in accordance with the manufacturer's instructions. Subject to technical changes.