Software

Digital planning support

myCalc
BIM
LogiKal
Ausschreiben.de

Experience the new window automation digital planning tool

The completely revised, intuitive myCalc user interface allows all requirements to be calculated on just one page of the application. myCalc is suitable for solutions in controlled natural ventilation (CNV), smoke and heat exhaust ventilation (SHEV) and the use of natural smoke and heat exhaust ventilators (NSHEV) in accordance with DIN EN 12101-2. Combinations of ventilation and smoke extraction requirements can also be calculated. Without leaving the page, all appropriate window drives and the associated results are displayed immediately in visual form. After selecting a drive, myCalc then also suggests the bracket set needed for installation – tailored to the relevant window profile. For all selected products, documents such as CAD drawings and instructions for use can be downloaded directly from myCalc.

Test myCalc Basic now and perform standardised calculations without logging in.

Standard-compliant NSHEV specifications

Particular customer specifications must be taken into account when calculating NSHEV requirements. The data recorded for these is automatically compared with the relevant performance classes for the respective window system. myCalc only provides an NSHEV specification and the corresponding declaration of performance as the result if all requirements have been met. This information can be referenced in the building application as verification of the required smoke-vent areas and their standard-compliant planning.

To give you an idea of how many certified NSHEV profile systems D+H features, here is an initial overview: Aluplast, Aluprof, Cast, Colt, Gutmann, Hueck, Heroal, Jansen, Menck, Raico, Reynaers, Sapa, Schüco, Skandinaviska, Sykon, Technal, Wicona.

Your system is not on the list? Not a problem. Contact us and we will find a solution. For all who want to get more information or try out myCalc: Please contact mycalc.support@dh-partner.com.

Plan your building with "Building Information Modeling"

The productivity of the entire planning process, especially when it comes to quality, efficiency and cost effectiveness, is improved, thanks to the accuracy of the data provided (which is collected continuously, throughout the building‘s lifecycle): D+H provides several data for KA, VCD, CDC, CDP, ZA and DXD drive series. In addition to the exact dimensions and designs for SHEV or CNV solutions, planners, architects, design engineers and engineers are provided with detailed technical information about the window drives.

D+H models are compatible with these programs: Revit, 3ds, Archicad, Autocad and Sketchup. IFC format is also available. Drives can be configured to suit every type and installation site (inward or outward opening; frame or sash mounting), open and closed. Diagrams of differing levels of detail ensure that planning projects don‘t generate unmanageable volumes of data.

Plan and produce windows, doors and façades more efficiently

LogiKal is the versatile solution for the metal construction business, suitable for use by door, window and façade construction companies. The software is equipped with the data for all common profile system and fitting system manufacturers. Interfaces to important systems such as CAD, ERP, CNC and Office applications are also available. LogiKal supports production companies by simplifying processes and ensuring quality.
The software guides the user through all important steps during planning, calculation, bid preparation, job preparation and production. With data regularly updated in the system, LogiKal also assists with structural safety when selecting window drives. The D+H LogiKal data package includes window drives of the CDC, KA and VCD series with the most frequently used bracket sets. For more information, such as the force calculation, smoke exhaust and compliance with EN12101-2, we recommend using the D+H myCalc planning software at the same time.

myCalc

Experience the new window automation digital planning tool

The completely revised, intuitive myCalc user interface allows all requirements to be calculated on just one page of the application. myCalc is suitable for solutions in controlled natural ventilation (CNV), smoke and heat exhaust ventilation (SHEV) and the use of natural smoke and heat exhaust ventilators (NSHEV) in accordance with DIN EN 12101-2. Combinations of ventilation and smoke extraction requirements can also be calculated. Without leaving the page, all appropriate window drives and the associated results are displayed immediately in visual form. After selecting a drive, myCalc then also suggests the bracket set needed for installation – tailored to the relevant window profile. For all selected products, documents such as CAD drawings and instructions for use can be downloaded directly from myCalc.

Test myCalc Basic now and perform standardised calculations without logging in.

Standard-compliant NSHEV specifications

Particular customer specifications must be taken into account when calculating NSHEV requirements. The data recorded for these is automatically compared with the relevant performance classes for the respective window system. myCalc only provides an NSHEV specification and the corresponding declaration of performance as the result if all requirements have been met. This information can be referenced in the building application as verification of the required smoke-vent areas and their standard-compliant planning.

To give you an idea of how many certified NSHEV profile systems D+H features, here is an initial overview: Aluplast, Aluprof, Cast, Colt, Gutmann, Hueck, Heroal, Jansen, Menck, Raico, Reynaers, Sapa, Schüco, Skandinaviska, Sykon, Technal, Wicona.

Your system is not on the list? Not a problem. Contact us and we will find a solution. For all who want to get more information or try out myCalc: Please contact mycalc.support@dh-partner.com.
BIM

Plan your building with "Building Information Modeling"
The productivity of the entire planning process, especially when it comes to quality, efficiency and cost effectiveness, is improved, thanks to the accuracy of the data provided (which is collected continuously, throughout the building‘s lifecycle): D+H provides several data for KA, VCD, CDC, CDP, ZA and DXD drive series. In addition to the exact dimensions and designs for SHEV or CNV solutions, planners, architects, design engineers and engineers are provided with detailed technical information about the window drives.
D+H models are compatible with these programs: Revit, 3ds, Archicad, Autocad and Sketchup. IFC format is also available. Drives can be configured to suit every type and installation site (inward or outward opening; frame or sash mounting), open and closed. Diagrams of differing levels of detail ensure that planning projects don‘t generate unmanageable volumes of data.
LogiKal

Plan and produce windows, doors and façades more efficiently

LogiKal is the versatile solution for the metal construction business, suitable for use by door, window and façade construction companies. The software is equipped with the data for all common profile system and fitting system manufacturers. Interfaces to important systems such as CAD, ERP, CNC and Office applications are also available. LogiKal supports production companies by simplifying processes and ensuring quality.
The software guides the user through all important steps during planning, calculation, bid preparation, job preparation and production. With data regularly updated in the system, LogiKal also assists with structural safety when selecting window drives. The D+H LogiKal data package includes window drives of the CDC, KA and VCD series with the most frequently used bracket sets. For more information, such as the force calculation, smoke exhaust and compliance with EN12101-2, we recommend using the D+H myCalc planning software at the same time.
Ausschreiben.de

CNV ventilation

Modern Comfort + Contemporary Ventilation

Windows & Acoustics

Headquarters

Sales

Purchase

D+H service and sales partners

The expansive D+H service and sales partner network offers property-based planning and consulting, proper installation, careful maintenance and reliable supply with spare parts.

Select your country and enter- if required - your postal code:

This browser version is no longer supported by us.

Software

Digital planning support