Controllers for SHEV smoke extraction and ventilation
In this age of smart buildings and smart homes, digital intelligent solutions that make living and working more convenient and can be integrated into building automation are more important than ever. Depending on the indoor climate as well as the wind and other weather conditions, the D+H control panels control the indoor air or, in emergency situations, signal to the window drives to open quickly to let smoke and heat escape. The SHEV control panels thus enable smoke extraction from the stairwell or lift.
In case of fire, the CPS-M smoke vent control panel opens your windows
SHEV systems such as the newly developed CPS-M ensure safe and reliable smoke exhaust. The new smoke vent control panel from D+H has a fully modular structure. This means that extra modules can be added to an active control panel, or existing modules can be replaced, at any time. The control panel does not have to be disconnected from the power supply to do so. This ensures that the current distribution without wiring continues to function. Thanks to the Advanced Communication Network (AdComNet) bus system tested by German product safety organisation VdS, communication can be established between additional ACN-compatible control panels. An additional module makes it possible for the controllers to exchange information with other systems via an open Modbus interface.
Controller for mechanical smoke and heat exhaust systems (MSE)
The CPS-M controller also guarantees fully automated and coordinated operation of MSE systems. In case of fire, the system activates automatically as soon as smoke is detected. The intake and exhaust air paths are opened, smoke is extracted and fresh air subsequently flows into the building.
Controllers
Overview of our control systems
CPS-M1-020-B
Fully modular, pre-assembled SHEV control panel: The CPS-M1-020-B is our most innovative development. It is equipped with a load current of 20 A, has six combined RT and RM lines as well as six motor connections that can be controlled separately, depending upon the requirement.CPS-M1-020-B
CPS-M1-040-B
Ingeniously simple with an ultra-compact design: The CPS-M1-040-B quickly and reliably provides smoke and heat exhaust ventilation with up to six combined RT and RM lines, six motor connections that can be controlled separately as well as a load current of 40 A.CPS-M1-040-B
CPS-M1-060-B
Smart and innovative: The pre-configured CPS-M1-060-B SHEV control panel is quicker than the fire brigade. The 60 A load current, up to four combined RT and RM lines as well as ten motor connections that can be controlled separately are heralding in a new dimension in the area of safety and security technology.CPS-M1-060-B
230 V AC SHEV-system (NSV)
Our SHEV solution for any building where the wiring effort needs to be reduced by using 230 V window drives: The 230 V AC SHEV system also provides an emergency power supply for 230 V drives in case of a power failure.230 V AC SHEV-system (NSV)
RZN 4503-T
Our turnkey package for small systems: The RZN 4503-T combines a SHEV control panel, ventilation button and trigger button in a single housing. The most compact control panel from D+H has an output of 3 A and is ideal for stairwells and single rooms.RZN 4503-T
RZN 4503-T Set
A convenient complete solution for smaller rooms and stairwells: In addition to the compact RZN 4503-T control panel with integrated smoke extraction and ventilation button, this controller set includes a second operation panel, a smoke detector and an emergency power battery.RZN 4503-T Set
CPS-B1-2.5-0101
Incredibly easy to install, our compact CPS-B smoke vent control panel embodies 50 years of expertise. Intelligent housing design with removable cover. Simple click-together installation to insert the control board and additional modules. Plug-in mains connection with screw terminal. This version has an output current of 2.5 A.CPS-B1-2.5-0101
CPS-B1-5-0101
This version of our ultra-compact CPS-B smoke vent control panel has an output current of 5 A for larger stairwells or larger buildings. Intelligent housing design with removable cover. Simple click-together installation to insert the control board and additional modules. Plug-in mains connection with screw terminal.CPS-B1-5-0101
RZN 4404-K V2
When you need plenty of power in a small space: Our RZN 4404-K V2 control panel in a compact sheet steel housing or plastic housing with sheet steel door operates using up to 4 A of drive current to provide safety, comfort and convenience in buildings.RZN 4404-K V2
RZN 4408-K
Improved voltage quality with plenty of power: The RZN 4408-K is one of the modular control panels and ensures the activation of SHEV and ventilation drives up to 8 A. AdComNet ready.RZN 4408-K
RZN 4404-M
Versatile SHEV modular control panel with 4 A for small and medium-sized buildings: With 2 lines, 2 groups and an expansion slot for an additional module, the RZN 4404-M features outstanding flexibility. AdComNet ready.RZN 4404-M
RZN 4408-M
Just as flexible as the RZN 4404-M, with twice the power: Our RZN 4408-M modular control panel provides activation of SHEV drives with a drive current of up to 8 A. For 2 fire compartments, 3 drive groups and an expansion slot. AdComNet ready.RZN 4408-M
RZN 4416-M
Powerful modular control panel with up to 16 A: As a compact SHEV control panel, our RZN 4416-M features a circuit board that is fixed in the housing. For 2 fire compartments, 3 drive groups and an expansion slot. AdComNet ready.RZN 4416-M
RZN 43xx-E
Commonly found in airports and shopping centres: With a virtually unlimited number of slots and freely scalable power, the RZN 43xx-E is a genuine all-around talent. Regardless of what type of construction project you are planning, this SHEV plug-in control panel simply does what you want.RZN 43xx-E
CPS-B1-2.5-0101-FR
The CPS-B1-2.5-0101-FR SHEV control panel is a compact product specifically designed for stairwells. In the design for the French market, two SHEV operation panels per line are possible. There is also a CMSI connection to the central building control system. This version operates with a 2.5 A output current.CPS-B1-2.5-0101-FR
CPS-B1-5-0101-FR
Our CPS-B1-5-0101-FR SHEV control panel, operating with a 5 A output current, is used for smoke extraction in larger stairwells and other types of installations. In the version for the French market, there is a CMSI connection to the central building control system. Cable monitoring operates even if only one of the power cables is defective.CPS-B1-5-0101-FR
DAC 4408-K
Improved voltage quality with plenty of power: The DAC 4408-K in a plastic housing is one of the modular control panels and ensures the activation of SHEV and ventilation drives up to 8 A. AdComNet ready.DAC 4408-K
DAC 4408-KS
Improved voltage quality with plenty of power: The DAC 4408-KS in a sheet steel housing is one of the modular control panels and ensures the activation of SHEV and ventilation drives up to 8 A. AdComNet ready.DAC 4408-KS
DAC 4404-M
Versatile SHEV modular control panel in plastic housing with 4 A for small and medium-sized buildings: With 2 lines, 2 groups and an expansion slot for an additional module, the DAC 4404-M features outstanding flexibility. AdComNet ready.DAC 4404-M
DAC 4404-MS
Versatile SHEV modular control panel in sheet steel housing with 4 A for small and medium-sized buildings: With 2 lines, 2 groups and an expansion slot for an additional module, the DAC 4404-MS features outstanding flexibility. AdComNet ready.DAC 4404-MS
DAC 4408-M
Just as flexible as the DAC 4404-M, with twice the power: Our DAC 4408-M modular control panel provides activation of SHEV drives with a drive current of up to 8 A. For 2 fire compartments, 2 drive groups and in a plastic housing. AdComNet ready.DAC 4408-M
DAC 4408-MS
Just as flexible as the DAC 4404-MS, with twice the power: Our DAC 4408-MS modular control panel provides activation of SHEV drives with a drive current of up to 8 A. For 2 fire compartments, 2 drive groups and in a sheet steel housing. AdComNet ready.DAC 4408-MS
DAC 4416-M
Powerful modular control panel with up to 16 A: As a compact SHEV control panel, our DAC 4416-M features a circuit board that is fixed in the steel housing. For 2 fire compartments, 3 drive groups and an expansion slot. AdComNet ready.DAC 4416-M
CPS-M1-MSE
Control system for smoke and heat exhaust ventilation and automated natural ventilation that can be modularly expanded to meet individual requirements. Perfect for controlling mechanical smoke and heat exhaust ventilation systems (MSE).CPS-M1-MSE
I/O module
Our I/O module enables communication between the AdComNet bus and commercially available peripherals via digital inputs and isolated contacts.I/O module
Connection module
The connection module provides all AdComNet-ready controllers with direct access to AdComNet, our proprietary bus communication network. This turns an individual system into a high-performance network for implementing large-scale projects.Connection module
Modbus gateway
The Modbus gateway enables communication between AdComNet bus and Modbus-based solutions.Modbus gateway
BACnet Modbus Gateway
The gateway allows D+H control panels and drives with ACB technology to be connected to BACnet-based building management systems. Simple programming with the D+H software SCS by importing the configuration file to link the two protocols. 100 freely configurable channels.BACnet Modbus Gateway
KNX Modbus RTU Gateway
Makes it possible to connect ACB drives and D+H control panels to KNX-based building management systems. 250 freely configurable channels. The compact gateway can be used as a Modbus master or slave. Galvanic isolation of Modbus connection and KNX bus.KNX Modbus RTU Gateway
CM-PSM-MSQ-TP-BTM-TCSU-CC
The basic / expansion set includes a supply and control unit as well as their required assemblies for setting up a CPS-M control panel with AdComNet and ACB. In addition, this set is equipped with a large colour touch display.CM-PSM-MSQ-TP-BTM-TCSU-CC
CM-B-PSM-MSQ-TP-BTM-TCSU-CC
As well as the assemblies required to set up a CPS-M control panel, the CM-B-PSM-MSQ-TP-BTM-TCSU-CC includes a combined supply and control unit. A large colour touch display is included in this basic / expansion set.CM-B-PSM-MSQ-TP-BTM-TCSU-CC
CM-PSM-MSQ-BTM-TCSU-CC
This module set for setting up a CPS-M control panel with AdComNet and ACB contains all the basic equipment and additions required, including all the relevant assemblies and a supply and control unit.CM-PSM-MSQ-BTM-TCSU-CC
CM-B-PSM-MSQ-BTM-TCSU-CC
A supply and control unit as well as the required assemblies for setting up a CPS-M control panel are included in this basic / expansion set.CM-B-PSM-MSQ-BTM-TCSU-CC
PSM-MS-TCSU-CC
The PSM-MS-TCSU-CC supply expansion set ensures that the CPS-M system is properly supplied with power up to 40 A. In the event of a power cut, it switches from the power supply unit to the battery. The set includes all components required to connect it to a CPS-M control panel.PSM-MS-TCSU-CC
AM-1-2-10-24-D6-D2
The AM-1-2-10-24-D6-D2 actuator module reliably monitors the infeed lines of the connected drives and ensures that the windows can be opened and closed reliably.AM-1-2-10-24-D6-D2
AM-B-1-2-10-24-D4-D2
Reliable opening and closing of windows: The AM-B-1-2-10-24-D4-D2 actuator module continuously monitors the infeed lines of the connected drives.AM-B-1-2-10-24-D4-D2
AM-1-1-08-230-D4-D2
Our AM-1-1-08-230-D4-D2 actuator module reliably monitors the infeed lines of the connected 230 V AC drives. It includes all relevant assemblies for connecting to a CPS-M control panel and for connecting an NSV 401 emergency power supply unit.AM-1-1-08-230-D4-D2
TMA-1-D4-D12
In the event of a fire the TMA-1-D4-D12 trigger module triggers an alarm via connected smoke detectors and smoke sensors, either automatically or via the push of a button. The set includes all relevant components for connecting to a CPS-M control panel.TMA-1-D4-D12
BRM-1-COC-0006
The BRM-1-COC-0006 bistable relay module guides the control panel and external voltages within a CPS-M through six configurable, isolated changeover contacts.BRM-1-COC-0006
IOM-D1-1212
The IOM-D1-1212 input-output module is an important addition to the CPS-M: it has 12 digital inputs and outputs for evaluating and reporting switch signals.IOM-D1-1212
ADM-AD1-1212-4
Compared to the IOM-D1-1212, the ADM-AD1-1212-4 input-output module offers the option of using 4 of the 12 digital inputs and outputs as analogue inputs. These are freely configurable and suitable for logic operations of various operation elements, such as sensors and signal emitters, via AdComNet.ADM-AD1-1212-4
MS-Q1-RR-TS
The MS-Q1-RR-TS 4-way module socket is used as a base for the controller module, a supply module and two freely configurable expansion module sockets for the actuator module and trigger module. Further expansion module sockets can be attached to the module socket.MS-Q1-RR-TS
MS-S1-DD-TS
The MS-S1-DD-TS expansion module socket is used as a base for the actuator module and trigger module.MS-S1-DD-TS
GE 628-L V2
Compared to the GE 628 V2 group plug-in unit, the window drives connected to the GE 628-L V2 can be used only for controlled natural ventilation.GE 628-L V2
ACB-BSY+-GW1-24
Converter from Modbus to BSY+: Thanks to the ACB BSY+ Gateway ACB-BSY+-GW1-24, now 24 V BSY+ drives can be easily integrated into an ACB network as well.ACB-BSY+-GW1-24
ACB-BSY+-GW1-230
Expanding BSY+ drives by ACB technology: Now, 230 V BSY+ drives can also be easily integrated into an ACB network using the ACB BSY+ Gateway ACB-BSY+-GW1-230.ACB-BSY+-GW1-230
BSY-GW 024-010-U
Our BSY-GW 024-010-U interface module can be used to activate BSY+ drives with perfect positioning via the building management system.BSY-GW 024-010-U
RACO2/T/F-U-D
The analogue RACO2/T/F-U-D room sensor monitors the air quality in living and office spaces. A colour LCD display shows the values for air temperature, humidity and CO2 concentration measured by the integrated sensor. For the implementation of automated ventilation applications, the measured values can be transmitted to a control panel via a 0-10 V output signal and evaluated there.RACO2/T/F-U-D
GVL 8301-K V2
The ventilation control panel in a compact surface-mounted housing: The GVL 8301-K V2 is ideal for use in small-scale applications such as individual rooms and conservatories.GVL 8301-K V2
GVL 8304-K
Our ventilation control panel GVL 8304-K can provide four times the power compared to the GVL 8301-K V2.GVL 8304-K
GVL 8401-K-RC V2
Can also be used via wireless remote control: The GVL 8401-K-RC V2 can be activated wirelessly, increasing user convenience.GVL 8401-K-RC V2
GVL 8408-M
Control multiple drive groups at the same time: The GVL 8408-M control panel is our powerful variant for controlled natural ventilation.GVL 8408-M
