D+H | Source: www.dh-partner.com                        04.09.2026

SHEV control panel - modular - freely configurable - CPS-M1-MSE
24 V DC / 230 V AC / 400 V AC / Special production according to customer requirements

Performance features:
For the activation and supply of 400 V AC fans for smoke exhaust in connection with 24 V DC and/or 230 V AC opening drives for the automated and emergency-powered opening of air supply openings.

The MSE control panel is approved for the 24 V DC range according to EN 12101-10.
Variable modular technology for complex position requirements.
Cable monitoring for short-circuit and recess for all electrically driven 24 V DC and 230 V AC drives for air supply and daily natural ventilation.
Precisely positioned activation of windows and skylights in conjunction with D+H ACB drives.
Flexible system design with any combination of functional modules.
Installation on 35 mm supporting rail system.

Possible function module:
- Controller module - CM-BT1-D4-P2
- Supply module - PSM-1-24-40
- Actuator module 24 V DC - AM-1-2-10-24-D6-D2
- Actuator module 230 V AC - AM-1-1-08-230-D4-D2
- Trigger module - TMA-1-D4-D12
- Bistable relay module - BRM-1-COC-0006
- Input output module digital - IOM-D1-1212
- Input output module analogue & digital- ADM-AD1-1212-4

Possible bus communication:
- KNX and Modbus via the D+H KNX Modbus RTU Gateway and ACN-GW501-MRTU AdComNet Modbus gateway

Object related visualization via touch panel possible.

Remote maintenance possible via the RM-GW-ETH gateway. Remote diagnosis of operating states and fault events.

Can be expanded via the AdComNet interface with further CM modules and AdComNet enabled devices from D+H.
Integrated 400 V AC mains switchover.
Addition of the drive current in 20 A steps.
Max. 10 A drive current per 24 V DC group.
Max. 8 A drive current per 230 V AC group.
Connection of up to 10 SHEV operation panels or 30 fire detectors per line (Only detectors permitted by D+H may be used).
Supply of all 24 V DC components in case of mains outage via independent internal emergency power supply for 72 h.

Power path with main switch and power distributor (rail system) up to 800 A. activation of 400 V AC fans using soft starters, frequency converters or direct start.

Integrated comfort functions for daily ventilation:
- Storage/key operation.
- OPEN running time limit
- Ventilation time limitation

Integrated protection functions:
- Weather signal = CLOSED control
- Mains outage = CLOSED control
- Temperature sensor for monitoring the operating status
- Smoke protection link to protect adjacent fire compartments against retroactive smoke introduction

Components can be retrofitted in case of building modifications.

Switchable MSE safety functions:
- Fault equal to alarm
- SHEV retriggering function and smoke detector remote reset
- Integrated monitoring of the fan maintenance switch

Technical data:
Supply: 400 V AC / 50 Hz
Output: 24 V DC / 230 V AC / 400 V AC
Ripple:  50 mVss at 24 V DC
Mode of operation monitoring: Pulse operation
Type of protection: IP54
Temperature range: -5 °C … +40 °C
Colour: Light grey (~ RAL 7035)
Housing: Steel sheet

Brand: D+H
Type: CPS-M1-MSE
Art. No.: 31.700.02

Quantity: .......... pcs     Price: ................. EUR     TP: ................. EUR

The D+H partner on site is at your disposal for design variants.

https://www.dh-partner.com/int/en/service/planning-support

Important information:

This product description does not constitute a tender. The responsibility for compliance with public procurement law requirements lies with the tendering planner or architect.

Installation and commissioning in accordance with the manufacturer's instructions.

Subject to technical changes.