Risk assessment + protective measures
Window manufacturers bear the liability risk as responsible installers of power-operated windows
Imagine your window drive opening and closing without taking possible dangers into consideration. Even if a person has their finger inside of the closing edge, the drive does not slow down or stop the closing process. At forces up to 300 N, such a scenario could end up being quite painful. To prevent this from happening, a risk assessment for these systems must be carried out as per the DIN EN 14351-1 product standard for windows and external doors based on the 2006/42/EC Machinery Directive. This is the obligation of the installer, the one who combines the drive or drive system with the window (e.g. the metalworker, window manufacturer or SHEV installer). The installer is liable in the event that the corresponding and health protection requirements are not met.
In this process, a risk assessment is performed in the planning stage, well before installation starts. This means that the system consisting of the drive and window needs to have been designed and produced under consideration of the results of the risk assessment.
The risk assessment includes:
- Evaluating possible dangers
- Carrying out suitable protective measures
- Cautioning against risks that remain
What protective measures are there?
There are no universal protective measures for the use of motorised window drives – a property-based risk analysis is always necessary. Different protective measures are required to minimise risk, depending on what risk is present. Through the specified risk assessment of the installation situation. Usage and control are determined using the specified protection classes of the required protective measures. In this process, measures of higher protection classes automatically cover those of lower protection classes. For example, possible protective measures include warning notices, rounded, padded edges or contact sensors.
What do you need to do to meet the requirements of the Machinery Directive?