1 D+H Mechatronic (english) 1.1 Special drives 1.1.1 PLP door opener drive - DDS 54/500 24 V DC / 1 A / 500 N / 500 mm stroke   Performance features: Electromotive drive unit can be used for opening single-leaf doors in case of SHEV and for daily ventilation. Equipped with motor electronics controlled via microprocessor. Programmable drive functions and performance features on site via Powerline (PLP) and the D+H software SCS. Opening of the door up to max. 90°, the door remains operable by hand. Special chain stabilisation. Control output for on-site electronic door release pre-installed at the factory. Electronic limit stop and overload cut-off. Mounting on wall or door frame.   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Force of pressure: 500 N Tensile force: 500 N Service life: 20000 double strokes Stroke length: 500 mm OPEN running speed: 11.8 mm/s CLOSED running speed: 11.8 mm/s Type of protection: IP 32 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -5 °C till +75 °C * Fire resistance: B300 (30 min / 300 °C) Housing: Aluminium Surface: Powder-coated Colour: White aluminium (~ RAL 9006) Connection: 2.5 m silicone cable Dimensions (WxHxD): 522 x 40 x 80 mm   * In accordance with VdS 2580   Scope of supply: Drive unit with 2.5 m silicone connection cable, incl. bracket set, instruction for use   Brand: D+H Mechatronic AG Type: DDS 54/500   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.002.40 1.1.2 PLP door opener drive - DDS-PLP - freely configurable 24 V DC / Special production according to customer requirements   Performance features: Electromotive drive unit can be used for opening single-leaf doors in case of SHEV and for daily ventilation. Equipped with motor electronics controlled via microprocessor. Programmable drive functions and performance features on site via Powerline (PLP) and the D+H software SCS. Opening of the door up to max. 90°, the door remains operable by hand. Special chain stabilisation. Control output for on-site electronic door release pre-installed at the factory. Electronic limit stop and overload cut-off. Mounting on wall or door frame.   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Force of pressure: 500 N Tensile force: 500 N Service life: 20000 double strokes Stroke length: 500 mm OPEN running speed: 11.8 mm/s CLOSED running speed: 11.8 mm/s Type of protection: IP 32 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -5 °C till +75 °C * Fire resistance: B300 (30 min / 300 °C) Housing: Aluminium Surface: Powder-coated Colour: on request Connection: Silicone cable Dimensions (WxHxD): 522 x 40 x 80 mm   * In accordance with VdS 2580   Scope of supply: Drive unit with silicone connection cable, incl. bracket set, instruction for use   Brand: D+H Mechatronic AG Type: DDS-PLP   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 26.500.00 1.1.3 Extension functions DDS-PLP Option "BRV" -Signal for connection to FRA, VLD, ERM 44 or AT 41 Option "SA" -End position message "switch OPEN" Option "SZ" -End position message "switch CLOSED" Option "SA-SZ" -End position message "switch OPEN" and "switch CLOSED" Option "special colour" -Colour coating for perfect integration into façade optics according to RAL, DB, NCS Unit : Stk 1.1.4 BSY+ side-hung vent drive - SHD 54/450-BSY+ (M2) 24 V DC / 1 A / 500 N / 450 mm stroke   Performance features: Electromotive drive unit for opening and closing of side-hung vent windows; The drive is equipped with motor electronics controlled via microprocessor; Drive functions and performance features are individually programmable; Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation; Particularly quiet drive in daily ventilation mode; For sash sizes up to 1.2 x 2 m; Opening the windows to 65° in less than 30 sec.; Electronic limit stop and overload cut-off; With integrated force and position control; Special chain stabilisation; Locking mechanism for the window in conjunction with window locking drive (optional);   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Configuration: Main 2 Force of pressure: 500 N Tensile force: 500 N Service life: 20000 double strokes Stroke length: 450 mm OPEN running speed: 11.8 mm/s. OPEN running speed - SHEV: 15.2 mm/s CLOSED running speed: 11.8 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C *) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: Aluminium Surface: Powder-coated Colour: White aluminium (~ RAL 9006) Connection: 2.5 m silicone cable Dimensions (WxHxD): 500 x 40 x 115 mm   * In accordance with VdS 2580   Scope of supply: Drive unit with 2.5 m silicone connection cable, incl. bracket set, instruction for use   Brand: D+H Mechatronic AG Type: SHD 54/450-BSY+ Set   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.050.81 1.1.5 BSY+ side-hung vent drive - SHD 54/450-BSY+ (S1) 24 V DC / 1 A / 500 N / 450 mm stroke   Performance features: Electromotive drive unit for opening and closing of side-hung vent windows; The drive is equipped with motor electronics controlled via microprocessor; Drive functions and performance features are individually programmable; Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation; Particularly quiet drive in daily ventilation mode; For sash sizes up to 1.2 x 2 m; Opening the windows to 65° in less than 30 sec.; Electronic limit stop and overload cut-off; With integrated force and position control; Special chain stabilisation; Locking mechanism for the window in conjunction with window locking drive (optional);   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Configuration: Sub 1 Force of pressure: 500 N Tensile force: 500 N Service life: 20000 double strokes Stroke length: 450 mm OPEN running speed: 11.8 mm/s. OPEN running speed - SHEV: 15.2 mm/s CLOSED running speed: 11.8 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C *) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: Aluminium Surface: Powder-coated Colour: White aluminium (~ RAL 9006) Connection: 2.5 m silicone cable Dimensions (WxHxD): 500 x 40 x 115 mm   * In accordance with VdS 2580   Scope of supply: Drive unit with 2.5 m silicone connection cable, incl. bracket set, instruction for use   Brand: D+H Mechatronic AG Type: SHD 54/450-BSY+ Set   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.050.82 1.1.6 Side-hung vent drive - SHD 54 - freely configurable 24 V DC / Special production according to customer requirements   Performance features: Electromotive drive unit for opening and closing of side-hung vent windows; PLP single drive (SHD 54/450) / BSY+ drive set (2 drives- SHD 54/450-BSY+ Set) The drive is equipped with motor electronics controlled via microprocessor; Drive functions and performance features are individually programmable; Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation; Particularly quiet drive in daily ventilation mode; For sash sizes up to 1.2 x 1 m (SHD 54/450) / 1.2 x 2 m (SHD 54/450-BSY+ Set); Opening the windows to 65° in less than 30 sec.; Electronic limit stop and overload cut-off; With integrated force and position control; Special chain stabilisation; Locking mechanism for the window in conjunction with window locking drive (optional);   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Force of pressure: 500 N Tensile force: 500 N Service life: 20000 double strokes Stroke length: 450 mm OPEN running speed: 11.8 mm/s. OPEN running speed - SHEV: 15.2 mm/s CLOSED running speed: 11.8 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C *) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: Aluminium Surface: Powder-coated Colour: on request Connection: Silicone cable Dimensions (WxHxD): 500 x 40 x 115 mm   * In accordance with VdS 2580   Scope of supply: Drive unit with silicone connection cable, incl. bracket set, instruction for use   Brand: D+H Mechatronic AG Type: SHD   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 26.501.00 1.1.7 Extension functions SHD Option "CP" -Customized drive function programming, e.g. operation speed, force and stroke Option "VP" -Signal programming for connection with D+H BSY+ locking drives Option " LS" -Low-speed programming in CLOSE direction 5 mm/s Option "AS2" -Acoustic signal according to protection class 2 MaschRL/42/EG - only BSY+ Option "AS3" -Acoustic signal according to protection class 3 MaschRL/42/EG - only BSY+ Option "BRV" -Signal for connection to FRA, VLD, ERM 44 or AT 41 Option "special colour" -Colour coating for perfect integration into façade optics according to RAL, DB, NCS Unit : Stk Information Selection Guide Technologie LIGHT (K) LIGHT actuators (230 V AC) can only be controlled in OPEN and CLOSE direction.     Technologie PLP Data transmission via the drive‘s connection cable. Drive characteristics can be programmed directly via the supply cable. Thus, no additional cable is required for parameterisation.     Technologie ACB Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Communication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB?capable control panel or enables it to be directly connected to higher-level controllers such as a building management system. 1.1.8 Louvre window drive - LDx-1 - freely configurable 24 V DC / Special production according to customer requirements   Drive with Power Line Programming Technology (PLP) for surface mounting at the louvre window profile (LDx-1-PLP). Drive with Modbus RTU interface for surface mounting at the louvre window profile (LDx-1-ACB). Flexible field of application by centred spindle nut with adapter for the variable admission of tappet. For the comfortable electromotive opening and closing of large and heavy louvre windows. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation.   Performance features for LDx-1-PLP: The drive is equipped with motor electronics controlled via microprocessor; Back rotation lock and spindle nut unit with high degree of efficiency; Stainless steel spindle with specially bearing spindle nut for lowest running noises; Passive and active anti-trap protection system comes standard and can be set via the D+H software SCS; Gasket protection thanks to the automatic relief of pressure on window gasket after a closing process; Drive functions and performance features are individually programmable via the D+H software SCS; Low operation noises; Drive in combination with super capacitors to safe the energy, in the event of a power outage, the drive automatically opens or closes;   Performance features for LDx-1-ACB: Integrated Advanced Communication Bus (ACB) interface with open Modbus RTU protocol; High-precise motor- and synchron electronic for parallel run for up to 8 drives; Back rotation lock and spindle nut unit with high degree of efficiency; Stainless steel spindle with specially bearing spindle nut for lowest running noises; Passive and active anti-trap protection system comes standard and can be set via the D+H software SCS; Gasket protection thanks to the automatic relief of pressure on window gasket after a closing process; Drive functions and performance features are individually programmable via the D+H software SCS; Low operation noises;   Functional description ACB Direct integration of drive by open Modbus RTU bus-communication via Advanced Communication Bus (ACB) for the building automation, e.g. in BMS (building management system) with following features: - Exact position operating (relative values, in 1% steps) - Creation of virtual groups at one output - OPEN and CLOSED-indication (incl. locking drive)/ group signal - Monitoring of connected drives - Status monitoring of motor - Diagnostic and parameterizing directly via controller/BMS - Modbus protocol "ACB planning manual" as download link on D+H´s website - Max. 32 ACB-bus-participants at Modbus RTU   Technical data: Operating voltage: 24 V DC / ±20 % Current consumption: 1.4 A (1400 N) 1.6 A (1800 N) Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Shutdown: Integrated electronic load cut-off Configuration: Main or Sub Design: asymmetrical, centred tappet Force of pressure: 1400 N + 1800 N Tensile force: 1400 N + 1800 N Nominal locking force: 5000 N (mounting dependent) Service life: 20000 double strokes Stroke length: up to 90 mm OPEN running speed: 2 mm/s CLOSED running speed: 2 mm/s Type of protection: IP 40 (IP 65 on request) Emission sound pressure level: LpA ≤ 45 dB(A) Temperature range: -5 °C till +75 °C * Fire resistance: B300 (30 min / 300 °C) Opening mechanic: maintenance-free stainless-steel spindle with linear moving spindle nut incl. adapter for various tappets Housing: Aluminium anodised EV1 (silver) Surface: Powder coated / painted (on request) Colour: RAL colours (on request) Dimensions (WxHxD): 365 x 70 x 38 mm   * In accordance with VdS 2580   Scope of supply: Louvre window drive, silicone connection cable with clamping connector (length up to max. 10 m), instruction for use   Brand: D+H Mechatronic AG Type: LDx-1-PLP   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.021.10 1.1.9 Louvre window drive - LDx-5 - freely configurable 230 V AC / Special production according to customer requirements   Drive for surface mounting at the louvre window profile (LDx-5). Drive with Modbus RTU interface for surfaced mounting at the louvre window profile (LDx-5-ACB). Flexible field of application by centred spindle nut with adapter for the variable admission of tappet. For the comfortable electromotive opening and closing of large and heavy louvre windows. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation.   Performance features for LDx-5: The drive is equipped with motor electronics controlled via microprocessor; Back rotation lock and spindle nut unit with high degree of efficiency; Stainless steel spindle with specially bearing spindle nut for lowest running noises; Passive and active anti-trap protection system comes standard and can be set via the D+H software SCS; Gasket protection thanks to the automatic relief of pressure on window gasket after a closing process; Drive functions and performance features are pre-installed at the factory (according to customer specification); Low operation noises;   Performance features for LDx-5-ACB: Integrated Advanced Communication Bus (ACB) interface with open Modbus RTU protocol; High-precise motor- and synchron electronic for parallel run for 2 drives; Back rotation lock and spindle nut unit with high degree of efficiency; Stainless steel spindle with specially bearing spindle nut for lowest running noises; Passive and active anti-trap protection system comes standard and can be set via the D+H software SCS; Gasket protection thanks to the automatic relief of pressure on window gasket after a closing process; Drive functions and performance features are individually programmable via the D+H software SCS; Low operation noises;   Functional description ACB Direct integration of drive by open Modbus RTU bus-communication via Advanced Communication Bus (ACB) for the building automation, e.g. in BMS (building management system) with following features: - Exact position operating (relative values, in 1% steps) - Creation of virtual groups at one output - OPEN and CLOSED-indication (incl. locking drive)/ group signal - Monitoring of connected drives - Status monitoring of motor - Diagnostic and parameterizing directly via controller/BMS - Modbus protocol "ACB planning manual" as download link on D+H´s website - Max. 32 ACB-bus-participants at Modbus RTU   Technical data: Operating voltage: 230 V AC / +10/-15 % Performance: 42 W / 65 VA (1400 N) 52 W / 75 VA (1800 N) Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Shutdown: Integrated electronic load cut-off Configuration: Main or Sub (with ACB) Design: asymmetrical, centred tappet Force of pressure: 1400 N + 1800 N Tensile force: 1400 N + 1800 N Nominal locking force: 5000 N (mounting dependent) Service life: 20000 double strokes Stroke length: up to 90 mm OPEN running speed: 2 mm/s CLOSED running speed: 2 mm/s Type of protection: IP 40 (IP 65 on request) Emission sound pressure level: LpA ≤ 45 dB(A) Temperature range: -5 °C till +75 °C * Fire resistance: B300 (30 min / 300 °C) Opening mechanic: maintenance-free stainless-steel spindle with linear moving spindle nut incl. adapter for various tappets Housing: Aluminium anodised EV1 (silver) Surface: Powder coated / painted (on request) Colour: RAL colours (on request) Dimensions (WxHxD): 365 x 70 x 38 mm   * In accordance with VdS 2580   Scope of supply: Louvre window drive, silicone connection cable with clamping connector (length up to max. 7.5 m), instruction for use   Brand: D+H Mechatronic AG Type: LDx-5-ACB   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.021.15 1.1.10 Extension functions - LDx Extension functions LDx-1-PLP and LDx-5   Option "CP" -Customized drive function programming, e.g. operation speed, force and stroke Option "HP" -Stroke programming Option "SA or SZ" -Generation of a signal when reaching an end position ("SA" for OPEN or "SZ" for CLOSED) Option "SKS" -Direct connection of an anti-pitch strip or an optical sensor for closing edge monitoring at the drive possible Option "special colour" -Colour coating / painting for perfect integration into façade optics     Extension functions LDx-1-ACB and LDx-5-ACB   Option "CP" -Customized drive function programming, e.g. operation speed, force and stroke Option "HP" -Stroke programming Option "AS2" -Acoustic signal according to protection class 2 MaschRL/42/EG Option "AS3" -Acoustic signal according to protection class 3 MaschRL/42/EG Option "SKS" -Direct connection of an anti-pitch strip or an optical sensor for closing edge monitoring at the drive possible Option "special colour" -Colour coating / painting for perfect integration into façade optics Unit : Stk 1.1.11 Louvre window drive - LDx - freely configurable 24 V DC / Special production according to customer requirements   Performance features: Electromotive drive unit for operation of louvre drive windows; High efficiency; Can be used in conjunction with D+H control panels for SHEV and natural ventilation; The drive is equipped with motor electronics controlled via microprocessor; Opening angle, cut-off forces and running speeds programmable via D+H software SCS; Force and position control for synchronous run of two drives; Corrosion-protected drive components; Additional passive and active anti-trap protection system for the main closing edges with reversing function; Louvre window drive can be adapted for all common louvre manufacturers (such as EuroLam, Fieger, HAHN, NACO, Schneider + Nölke). (The louvre has to be prepared for using the drive.);   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 0.8 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Nominal force: 600 N / 800 N / 900 N Design: Right + Left Service life: 20000 double strokes Stroke length: 28.5 mm - 80 mm OPEN running speed: 1.4 mm/s / 2.1 mm/s CLOSED running speed: 1.4 mm/s / 2.1 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -5 °C till +75 °C * Fire resistance: B300 (30 min / 300 °C) Material housing: V2A stainless steel Material end cover: Plastic Connection: Silicone cable Dimensions (WxHxD): 413/423 x 25 x 25 mm   * In accordance with VdS 2580   Scope of supply: Drive unit with silicone connection cable with plug adapter, instruction for use   Brand: D+H Mechatronic AG Type: LDx   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.020.10