1	D+H Mechatronic (english)
1.1	Power supply units
1.1.1	Power pack - PS-S1-24-20
24 V DC / 20 A
 
Performance features:
With the power packs of the PS Series, a freely scalable power supply can be set up.
Standardized mounting on a 35 mm DIN rail ensures simple expandability. The wide input voltage range allows worldwide use without special selection of components. The low ripple, the short-circuit resistance and the highly efficient reverse voltage protection also represent an essential element for safe and powerful supply. The use of low-loss electronics achieves a high degree of efficiency in the voltage transformation.
Several power packs can be connected together to increase reliability or cope with large electrical loads.
 
Technical data:
Input voltage: 230 V AC / ±10 % / 45 - 65 Hz
Performance: 480 W / 530 VA
Output: 24 V DC (22.4 - 29.5 V DC) / 20 A
Ripple: <50 mVss
Temperature range: -25 °C till +60 °C
Air humidity: 5 - 95 %, no condensation
Installation: 35 mm top hat rail
Short-circuit resistant: YES
Reverse-voltage protected: YES
Line terminal input: max. 6 mm² rigid / max. 4 mm² flexible
Line terminal output: max. 6 mm² rigid / max. 4 mm² flexible
Dimensions (WxHxD): 90 x 130 x 150 mm
 
Scope of supply:
Power supply unit
 
Brand: D+H Mechatronic AG
Type: PS-S1-24-20
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 64.801.98

1.1.2	Power pack - PS-S1-24-40
24 V DC / 40 A
 
Performance features:
With the power packs of the PS Series, a freely scalable power supply can be set up.
Standardized mounting on a 35 mm DIN rail ensures simple expandability. The wide input voltage range allows worldwide use without special selection of components. The low ripple, the short-circuit resistance and the highly efficient reverse voltage protection also represent an essential element for safe and powerful supply. The use of low-loss electronics achieves a high degree of efficiency in the voltage transformation.
Several power packs can be connected together to increase reliability or cope with large electrical loads.
 
Technical data:
Input voltage: 230 V AC / ±10 % / 45 - 65 Hz
Performance: 960 W / 1040 VA
Output: 24 V DC (22.4 - 29.5 V DC) / 40 A
Ripple: <50 mVss
Temperature range: -25 °C till +60 °C
Air humidity: 5 - 95 %, no condensation
Installation: 35 mm top hat rail
Short-circuit resistant: YES
Reverse-voltage protected: YES
Line terminal input: max. 6 mm² rigid / max. 4 mm² flexible
Line terminal output: max. 16 mm² rigid / max. 16 mm² flexible
Dimensions (WxHxD): 140 x 130 x 150 mm
 
Scope of supply:
Power supply unit
 
Brand: D+H Mechatronic AG
Type: PS-S1-24-40
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 64.801.99

1.1.3	Power supply unit - PS-VE2
230 V AC / 78 VA / Output: 24 V DC / 2 A
 
Performance features:
External compact power supply unit, 230 V AC;
For controlling 24 V DC drives (max. 1 A);
Activation, e.g. using 230 V AC ventilation button;
Recognition of HS-function (high-speed run, both input phases switched);
High efficiency of 92 % at nominal current;
Surface-mounted design;
 
Technical data:
Supply: 230 V AC / +10/-15 % / 50 - 60 Hz
Performance: 56 W / 78 VA
Output: 24 V DC / 2 A
Mode of operation: Short-time duty 30 % duty cycle
Type of protection: IP 66
Temperature range: 0 °C till +60 °C
Housing: Polypropylene
Colour: Light grey (~ RAL 7035)
Dimensions (WxHxD): 180 x 130 x 77 mm
 
Scope of supply:
Power supply unit, installation holder, instruction for use
 
Brand: D+H Mechatronic AG
Type: PS-VE2
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.242.10

1.1.4	Power supply unit - PS-VE4 V2
230 V AC / 110 VA / Output: 24 V DC / 4 A
 
Performance features:
External compact power supply unit, 230 V AC;
For controlling 24 V DC drives (max. 4 A);
Activation, e.g. using 230 V AC ventilation button;
Recognition of HS-function (high-speed run, both input phases switched);
High efficiency of 92 % at nominal current;
Surface-mounted design;
 
Technical data:
Supply: 230 V AC / +10/-15 % / 50 - 60 Hz
Performance: 105 W / 110 VA
Output: 24 V DC / 4 A
Mode of operation: Short-time duty 30 % duty cycle
Type of protection: IP 66
Temperature range: 0 °C till +60 °C
Housing: Polypropylene
Colour: Light grey (~ RAL 7035)
Dimensions (WxHxD): 180 x 130 x 77 mm
 
Scope of supply:
Power supply unit, installation holder, instruction for use
 
Brand: D+H Mechatronic AG
Type: PS-VE4 V2
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.242.20

1.1.5	Power supply unit - PS-VE6
230 V AC / 165 VA / Output: 24 V DC / 6 A
 
Performance features:
External compact power supply unit, 230 V AC;
For controlling 24 V DC drives (max. 6 A);
Activation, e.g. using 230 V AC ventilation button;
Recognition of HS-function (high-speed run, both input phases switched);
High efficiency of 92 % at nominal current;
Surface-mounted design;
 
Technical data:
Supply: 230 V AC / +10/-15 % / 50 - 60 Hz
Performance: 156 W / 165 VA
Output: 24 V DC / 6 A
Mode of operation: Short-time duty 30 % duty cycle
Type of protection: IP 66
Temperature range: 0 °C till +60 °C
Housing: Polypropylene
Colour: Light grey (~ RAL 7035)
Dimensions (WxHxD): 180 x 130 x 77 mm
 
Scope of supply:
Power supply unit, installation holder, instruction for use
 
Brand: D+H Mechatronic AG
Type: PS-VE6
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.242.30

1.1.6	CNV power supply unit - SNT 2
230 V AC / 110 VA / Output: 24 V DC / 2 A
 
Performance features:
External ventilation power supply unit, 230 V AC;
For controlling 24 V DC drives (max. 2 A);
Activation, e.g. using 230 V AC ventilation button;
Surface-mounted design;
 
Technical data:
Supply: 230 V AC / 50 Hz
Performance: 65 W / 110 VA
Output: 24 V DC / 2 A
Mode of operation: Short-time duty 20 % duty cycle
Type of protection: IP 50
Temperature range: 0 °C till +60 °C
Housing: Aluminium
Colour: Silver (~ RAL 9006)
Dimensions (WxHxD): 232 x 50 x 40 mm
 
Scope of supply:
Power supply unit with double-sided 2.5 m connection cable, instruction for use
 
Brand: D+H Mechatronic AG
Type: SNT 2
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 20.031.60