1	D+H Mechatronic (english)
1.1	Modules
1.1.1	Gateway BACnet - BACnet Modbus Gateway V2
Gateway BACnet to Modbus/ACN
 
Performance features:
High-performing gateway to establish a connection between the two protocols BACnet and Modbus. An integration of Modbus devices supporting the RTU protocol via RS-485 into BACnet controlled systems can be easily implemented via the BACnet gateway. At least 100 freely configurable data points (BACnet options) can be selected. The Modbus registers of the system to be controlled can be exported to the BACnet software in the D+H software SCS. The interpretation and scaling of the Modbus data according to the data point types of the BACnet standard, are assigned automatically. The gateway is executed as a master module. The device status is visualized by multicolor LEDs on the front panel. The Modbus connection is galvanically isolated from the BACnet bus. All connections are pluggable.
 
Technical data:
Mounting type: DIN in-line mounting TH35
Power supply: Auxiliary voltage 9 - 36 V DC / 24 V AC
Power consumption: Max. 140 mA
Display elements: 10 LEDs multicolor
Data channel management: Modbus-Master
Modbus channels: Up to 100
Modbus type: RTU (RS-485)
BACnet type: MSTP or IP
Connection cross section : 0,5 - 2,5 mm²
Cable socket for Modbus: Plug-in screw terminals (2x2-pole)
Cable socket for power supply: Plug-in screw terminal (3-pole)
Type of protection: IP 20
Temperature range: 0 °C till + 60 °C
Housing material: Plastic (UL 94 V-0)
Dimensions (WxHxD): 90 x 88 x 56 mm
Weight: approx. 180 g
 
Scope of supply:
Gateway, user manual, USB-configuration cable
 
Brand: D+H Mechatronic AG
Type: BACnet Modbus Gateway V2
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 70.602.22

1.1.2	KNX Gateway- KNX Modbus RTU Gateway
Gateway KNX to Modbus/ACN
 
Performance features:
Compact KNX Modbus RTU Gateway with a width of max. 1 DU (18 mm) with 250 freely configurable channels (KNX data points). Easy integration of Modbus devices that support the RTU protocol via RS-485 Modbus Main (Client) or Sub (Server) function. The assignment between KNX objects and Modbus registers can be configured via parameters in the ETS. Including interpretation and scaling of Modbus data according to the data point types of the KNX standard. Via a DCA plugin it is possible to import the project image from the D+H Software SCS into the gateway. Local operation (test functions) and visualization of the device status via push buttons and multicoloured LEDs on the device front. The Modbus connection is electrically isolated from the KNX bus. All connections are pluggable
 
 
Technical data:
Type of installation: DIN rail with 1 DU (18 mm)
Supply voltage Modbus-side: Auxiliary supply 12 - 24 V DC
Input power KNX Bus-side: Approx. 4 mA
Input power Modbus-side: Approx. 5 mA
Operation elements: 2 buttons
Display elements: 3 LEDs multicoloured
Modbus channels: Up to 250
Modbus type: RTU (RS-485) Main (Client) or Sub (Server)
Connection cable diameter: 0.34 - 2.5 mm²
Connection type for Modbus: Screw terminal pluggable (3-pin)
Connection type for auxiliary supply: Screw terminal pluggable (3-pin)
Type of protection: IP 20
Temp. range: -5 °C till + 45 °C
Housing material: Plastic
Weight: Approx. 50
 
Scope of supply:
Module
 
Brand: D+H Mechatronic AG
Type: KNX Modbus RTU Gateway
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 70.602.18

1.1.3	ACB interface module- ACB-BSY+-GW1-24
ACB interface module for 24 V DC BSY+ drives
 
Performance features:
Interface module between building management system or D+H control panel (CPS-M1) and a 24 V DC BSY+ drive group;
Expands the drive functions, for example, to include functions of precise position control and virtual group formation;
Enables the use of real drive positions, for example, for OPEN and CLOSED signals;
Fault message of the individual BSY+ group;
No special drive notification or configuration require;
For installing on-site junction box;
 
Technical data:
Operating voltage: 24 V DC / ±15 % via Mot.a Mot.b
Stand-by power: 0.24 W
ACB input: Modbus RTU
Data output: BSY+
Switching output: 24 V DC, max. 10 A
Wire cross section: max. 2.5 mm²
Type of protection: IP 30
Temperature range: -5 °C till +75 °C
Housing: Plastic material
Connection: Push-in terminals
Dimensions (WxHxD): 50 x 48 x 19 mm
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: ACB-BSY+-GW1-24
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.555.10

1.1.4	ACB interface module - ACB-BSY+-GW1-230
ACB interface module for 230 V AC BSY+ drives
 
Performance features:
Interface module between building management system or D+H control panel (CPS-M1) and a 230 V AC BSY+ drive group;
Expands the drive functions, for example, to include functions of precise position control and virtual group formation;
Enables the use of real drive positions, for example, for OPEN and CLOSED signals;
Fault message of the individual BSY+ group;
No special drive notification or configuration required;
Galvanic isolation between the input signal and output signal;
For installing on-site junction box;
Galvanic isolation between both connection terminals;
 
Technical data:
Operating voltage: 24 V DC / ±15 %
Stand-by power: 0.24 W
ACB input: Modbus RTU
Data output: BSY+
Wire cross section: max. 1.5 mm²
Type of protection: IP 30
Temperature range: -5 °C till +75 °C
Housing: Plastic material
Connection: Push-in terminals
Dimensions (WxHxD): 50 x 48 x 19 mm
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: ACB-BSY+-GW1-230
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.555.20

1.1.5	ACB-Satellite - ACB-PSD-GW1-24-5
ACB Satellite
 
Performance features:
Functional enhancement of a reverse-polarity drive with ACB functionalities.
The drive functionalities of the reverse-polarity drives are extended by the control with perfect positioning and the virtual group formation.
The functional enhancement enables the use of determined drive positions for e.g. OPEN-CLOSE signals.
Digital and analog inputs, digital outputs and a ventilation button can be parameterised for ventilation groups.
Up to 20 ACB-satellites can be used per ventilation group, which are supplied via the CPS-M1 or an external power source.
The ACB-satellite is installed between the reverse-polarity drives and the CPS-M1 in a junction box.
 
Technical data:
Supply: 24 V DC / ± 15 %
Ripple: < 10 % 
Stand-by power: 0.15 W
Nominal output current: max. 5 A
ACB-input: Modbus RTU
Digital input: 4x (minus-active)
Analogue input: 2x (0 - 10 V DC)
Ventilation button: 1x
Digital output: max. output current 50 mA
Temperature range: -5 °C till +50 °C
Connection: Push-in terminals
Wire cross section 24 V DC and MOT a/b: max. 2.5 mm²
Wire cross section ACB a/b and digital/analogue in- and outputs: max. 1.5 mm²
Type of protection: IP 30
Housing: Plastic
Dimensions (WxHxD): 50 x 48 x 19 mm 
 
Scope of supply:
ACB-Satellit, Gebrauchsanleitung
 
Brand: D+H Mechatronic AG
Type: ACB-PSD-GW1-24-5
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.555.40

1.1.6	0 to 10 V DC gateway on BSY+ - BSY-GW 024-010-U
Interface module for BSY+ drives
 
Performance features:
Interface module between the building management system (BMS) and a BSY+ drive group in conjunction with a D+H control panel;
Simple plug-and-play commissioning;
No special drive notification or configuration required;
Galvanic isolation between the input signal and output signal;
Simple integration into new and existing systems;
For installing on-site junction box;
 
Technical data:
Power supply: 24 V DC / ±20 % / 20 mA
BMS input: 0 - 10 V DC => 0 - 100 % stroke
(< 0.5 V = CLOSE; > 9.5 V = OPEN, max. 30 V)
Input hysteresis: ± 0,5 V
Input impedance: approx. 100 kOhm
Switching output: 24 V DC, max. 60 mA (3 groups)
Type of protection: IP30
Temperature range: -5 °C till 50 °C
Housing: Plastic
Connection: Push-In terminals
Dimensions (WxHxD): 50 x 48 x 19 mm
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: BSY-GW 024-010-U
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.554.90

1.1.7	End relay module - ERM 44
in conjunction with D+H drives
 
Performance features:
For isolated OPEN or CLOSED signal of a drive or a drive group;
Activation via BSY+ line, BRV message or TMS output (only for CDC);
Installing in a junction box, for example (not included);
 
Technical data:
Power supply: 24 V DC
Contact load capacity: 60 V DC / 1 A
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: ERM 44
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.552.50

1.1.8	Closing edge safety module - SSM 45
Entrapment protection in conjunction with D+H 24 V DC drives
24 V DC, max. 2 contact tubes
 
Performance featrues:
For securing the main and side closing edges of a window in conjunction with (a maximum of 2) contact
tubes;
Automatic reversing mode;
Burglary protection, automatic deactivation of the safety edge after 3 min;
Cable monitoring for short circuit and recess;
Installing in a junction box, for example (not included);
 
Technical data:
Power supply: 24 V DC (from driving line)
Switching capacity: max. 5 A
Terminal resistor: 5.6 kOhm
Wire break triggering: 14 kOhm ±100 Ohm (e.g. parallel resistance 1.6 kOhm)
Dimensions (WxHxD): 48 x 50 x 23 mm
 
Scope of supply:
Module without contact tubes (on-site), instruction for use
 
Brand: D+H Mechatronic AG
Type: SSM 45
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.553.20

1.1.9	Sequence control module - FS 41
for overlapping window sashes
 
Performance features:
For consistent opening and closing of motor-operated, overlapping window sashes;
Delays the start-up of a sash side in the OPEN / CLOSED direction to guarantee safe opening/closing;
For installing on the control panel or on-site junction box;
 
Technical data:
Power supply: 24 V DC / ±15 %
Delay time: approx. 15 seconds per direction
Switching capacity per sash: 24 V DC, max. 50 W (2 A)
Dimensions (WxHxD): 58 x 23 x 58 mm
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: FS 41
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.550.60

1.1.10	Group hub - GSV 45
Module for top hat rail installation for D+H 24 V DC drives in conjunction with D+H SHEV control panels
 
Performance features:
For dividing the drive connection wires of a group into 2 sections for each 3 wires;
Option of parallel connection of up to 4x GSV 45 on one group;
Installing in a junction box, for example (not included);
Top hat rail design;
 
Technical data:
Dimensions (WxHxD): 38 x 68 x 23 mm
(without snap-on foot)
 
Scope of supply:
Module with 2 terminal modules incl. snap-on foot, instruction for use
 
Brand: D+H Mechatronic AG
Type: GSV 45
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.554.10

1.1.11	Pulse module - IM 44-K/M
for SHEV control panels RZN 43xx-E
for controlling by a fire alarm control unit
 
Performance features:
For controlling by an upstream fire alarm control unit;
For alarm triggering and resetting the SHEV system (RZN-K/-M) when using pulse control;
For converting continuous switch signals to pulse switching signals, e.g. in conjunction with pulse solenoid valves;
For installation on RM / RT central slot;
Decentralised Master/Slave SHEV controller;
 
Scope of supply:
Module, connection terminal, instruction for use
 
Brand: D+H Mechatronic AG
Type: IM 44-K/M
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.552.70

1.1.12	Pulse module - IM 80
Module for top hat rail installation
 
Performance features:
For converting continuous switch signals to pulse switching signals, e.g. in conjunction with pulse solenoid valves;
Top hat rail design;
 
Scope of supply:
Module incl. snap-on foot, instruction for use
 
Brand: D+H Mechatronic AG
Type: IM 80
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.550.40

1.1.13	Drive delay module - AT 41
for SHEV control panels RZN 43xx-E, RZN 44xx-K/M and CNV control panels GVL 83xx-E, GVL 8408-M
e.g. in case of shading by others
 
Performance features:
Delays the start-up of the window drives to prevent faults when opening the sash or to prevent restrictions of the SHEV cross section due to on-site motor-operated exterior shading;
For installation on LT / MOT central slot;
Retracts the sun shading in case of an alarm and subsequently opens the SHEV sash in a time-delayed manner;
Only use in conjunction with D+H drives with BRV message;
 
Scope of supply:
Module, connection terminal, instruction for use
 
Brand: D+H Mechatronic AG
Type: AT 41
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.551.70

1.1.14	Transfer module - UM 41-Z
for SHEV control panels RZN 43xx-E and RZN 44xx-K/M
in conjunction with RT BE42-Z (K)
 
Performance features:
Application in conjunction with RT BE42-Z and RT BE42-Z-K;
Pluggable on line space (RM / RT);
 
Technical datal:
Supply: 24 V DC (18 - 28 V DC)
 
Scope of supply:
Module
 
Brand: D+H Mechatronic AG
Type: UM 41-Z
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.526.10

1.1.15	Weather stepping relay - WFR 41
for SHEV control panels RZN 43xx-E, RZN 44xx-K/M and CNV control panels GVL 83xx-E
for relaying of weather-CLOSED signal
 
Performance features:
Interface module for D+H wind and rain detectors;
For installation on E1 / E2 central slot;
With isolated changeover contact for relaying the weather CLOSED signal to other control panels;
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: WFR 41
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.526.80

1.1.16	Alarm cut-off module + time-limit - AM 44-Z
for SHEV control panels RZN 43xx-E and RZN 44xx-K/M
 
Performance features:
Supply of external alarm devices such as sirens, fire bells and flashing lights;
For installation on E1 / E2 central slot;
Options of manual alarm cut-off via optional collective signal panel or automatic via the preset time;
Configurable alarm time limit from 0.5 to 4 minutes;
 
Scope of supply:
Module, connection terminal, instruction for use
 
Brand: D+H Mechatronic AG
Type: AM 44-Z
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.524.90

1.1.17	Diode matrix - DM 41
Module for top hat rail installation
 
Performance features:
Made of 12 individual LEDs or resistors that can be wired independently;
Top hat rail design;
 
Scope of supply:
Module incl. snap-on foot
 
Brand: D+H Mechatronic AG
Type: DM 41
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.551.00

1.1.18	Cut-off relay - CR-1
Module for top hat rail installation
24 V DC / 21.8 mA / max. 230 V AC / 5 A
 
Performance features:
E.g. for remote signaling fault or alarm notification;
For installation in D+H smoke extraction or ventilation control panel;
Module for top hat rail installation;
 
Technical Data:
Rated control voltage: 24 V DC / 0.02 A
Contact load capacity: max. 230 V AC / 5 A
Contact type: 2 isolated changeover contacts
 
Scope of supply:
Module
 
Brand: D+H Mechatronic AG
Type: CR-1
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.550.90

1.1.19	Cut-off relay - CR-5
Module for top hat rail installation
230 V AC / 4.9 mA / max. 230 V AC / 5 A
 
Performance features:
E.g. for remote signaling fault or alarm notification;
For installation in D+H smoke extraction or ventilation control panel;
Module for top hat rail installation;
 
Technical Data:
Rated control voltage: 230 V AC / 0.005 A
Contact load capacity: max. 230 V AC / 5 A
Contact type: 2 isolated changeover contacts
 
Scope of supply:
Module
 
Brand: D+H Mechatronic AG
Type: CR-5
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.550.95

1.1.20	Cut-off relay module - TR 42
for SHEV control panels RZN 43xx-E and RZN 44xx-K/M
max. 230 V AC / 8 A
 
Performance features:
E.g. for remote signalling a fault or an alarm;
For installation on E1 / E2 central slot;
 
Technical data:
Power supply: 24 V DC / 0.02 A
Switching capacity: max. 230 V AC / 8 A
Switching contact: 2 isolated changeover contacts
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type: TR 42
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.525.80

1.1.21	Cut-off relay module - TR 44-K
Module for top hat rail installation
24 V DC / max. 230 V AC / 720 VA
 
Performance features:
For controlling 230 V AC D+H drives on 24 V DC groups in D+H SHEV and CNV control panels;
Top hat rail design;
 
Technical data:
Input voltage: 24 V DC / ±10 %
Output voltage: max. 230 V AC
Switching capacity (at 230 V AC): max. 720 VA (max. 15 D+H drives)
Dimensions (WxHxD): 87 x 87 x 53 mm
 
Scope of supply:
Module, instruction for use
 
Brand: D+H Mechatronic AG
Type TR 44-K
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.552.30

1.1.22	Cut-off relay module - TRL 8
Module for top hat rail installation
24 V DC / max. 230 V AC / 720 VA
 
Performance features:
For controlling a 230 V AC ventilation group via isolated double changeover contact 230 V AC / 5 A;
For combining multiple ventilation groups;
For central closing function in conjunction with WRZ and WRZ 8000;
Top hat rail design;
 
Technical data:
Supply: 24 V DC / ±10 % / 0.02 A
Output voltage: max. 230 V AC
Switching capacity (at 230 V AC): max. 1750 VA (max. 8 D+H drives)
Dimensions (WxHxD): 51 x 68 x 42 mm
 
Scope of suppla:
Module incl. snap-on feet, instruction for use
 
Brand: D+H Mechatronic AG
Type: TRL 8
 
Planning Support (https://www.dh-partner.com/int/en/service/planning-support)

Unit : Stk
Artikelnr. : 30.500.30