1 D+H Mechatronic (english) 1.1 Fitting drives 1.1.1 BSY+ window locking drive - FRA 11-BSY+ 24 V DC / 1 A / 10 Nm   Performance features: Electromotive drive unit for operating von window lock fittings in conjunction with an internal chamber gearbox and 43 mm mounting distance. Drive for mounting on the sash instead of the window handle. Drive is equipped with motor electronics controlled via microprocessor BSY+ for communication and sequence control in conjunction with D+H BSY+ window drives for opening windows. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation. Individual programmable drive functions and different drive parameters via the D+H software SCS. VP signal of the connected BSY+ opening drives must be activated.   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Torque: 10 Nm * Rotation angle: 90° / 180° Service life: > 10000 cycles Type of protection: IP 40 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -5 °C till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: Polyamide Surface: Painted Colour: Silver (~ RAL 9006) Connection: 2.5 m silicone cable Dimensions (WxHxD): 43 x 200 x 43 mm   * Breaking load of square shaft   Scope of supply: Drive unit with 2.5 m silicone connection cable, two square-section pins with different lengths, fastening materials, instruction for use   Brand: D+H Mechatronic AG Type: FRA 11-BSY+   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.000.11 1.1.2 BSY+ window locking drive - FRA-BSY+ - freely configurable 24 V DC / Special production according to customer requirements   Performance features: Electromotive drive unit for operating von window lock fittings in conjunction with an internal chamber gearbox and 43 mm mounting distance. Drive for mounting on the sash instead of the window handle. Drive is equipped with motor electronics controlled via microprocessor BSY+ for communication and sequence control in conjunction with D+H BSY+ window drives for opening windows. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation. Individual programmable drive functions and different drive parameters via the D+H software SCS. VP signal of the connected BSY+ opening drives must be activated.   Technical data: Operating voltage: 24 V DC / ±15 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Torque: 10 Nm * Rotation angle: 90° / 180° Service life: > 10000 cycles Type of protection: IP 40 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -5 °C till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: Polyamide Surface: Painted Colour: on request Connection: Silicone cable Dimensions (WxHxD): 43 x 200 x 43 mm   * Breaking load of square shaft   Scope of supply: Drive unit with silicone connection cable, two square-section pins with different lengths, fastening materials, instruction for use   Brand: D+H Mechatronic AG Type: FRA-BSY+   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.000.10 1.1.3 Extension functions FRA-BSY+ Option "special colour" -Colour coating for perfect integration into façade optics according to RAL, DB, NCS Unit : Stk 1.1.4 Linear lock drive - VLD 51/038 24 V DC / 1 A / 500 N / 38 mm stroke   Performance features: Electromotive drive unit for the integrated mounting in the window profile. For operating standard latch pane fittings in the window profile. A connection of D+H window drives with "BRV" message is possible. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation. Switching current for window drives up to 2.5 A, daisy-chain contacts 60 V / 1 A available e.g. for alarm or drive notifications. Running and locking direction can be set via slide switch. A manual emergency release is possible with a special tool.   Technical data: Operating voltage: 24 V DC / ±20 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Contact load capacity: 2.5 A Locking force: 500 N Breakaway force: 1000 N * Service life: > 10000 cycles Locking stroke: 38 mm OPEN running speed: 4.2 mm/s CLOSED running speed: 4.2 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C **) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: V2A stainless steel Connection: 2.5 m silicone cable Dimensions (WxHxD): 493 x 25 x 25 mm   * Breakaway force in release position ** In accordance with VdS 2580   Scope of supply: Drive unit with 2.5 m silicone connection cable with plug adapter, fastening materials for integrated or mounted installation, instruction for use   Brand: D+H Mechatronic AG Type: VLD 51/038   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.060.50 1.1.5 Linear lock drive - VLD - freely configurable 24 V DC / Special production according to customer requirements   Performance features: Electromotive drive unit for the integrated mounting in the window profile. For operating standard latch pane fittings in the window profile. A connection of D+H window drives with "BRV" message is possible. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation. Switching current for window drives up to 2.5 A, daisy-chain contacts 60 V / 1 A available e.g. for alarm or drive notifications. Running and locking direction can be set via slide switch. A manual emergency release is possible with a special tool.   Technical data: Operating voltage: 24 V DC / ±20 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Contact load capacity: 2.5 A Locking force: 500 N Breakaway force: 1000 N * Service life: > 10000 cycles Locking stroke: on request OPEN running speed: 4.2 mm/s CLOSED running speed: 4.2 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C **) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: V2A stainless steel Colour: on request Connection: Silicone cable Dimensions (WxHxD): 493 x 25 x 25 mm   * Breakaway force in release position ** In accordance with VdS 2580   Scope of supply: Drive unit with silicone connection cable with plug adapter, fastening materials for integrated or mounted installation, instruction for use   Brand: D+H Mechatronic AG Type: VLD   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.060.00 1.1.6 Extension functions VLD Option "special colour" -Colour coating for perfect integration into façade optics according to RAL, DB, NCS Unit : Stk 1.1.7 BSY+ linear lock drive - VLD 51/038-BSY+ 24 V DC / 1 A / 500 N / 38 mm stroke   Performance features: Electromotive drive unit for the integrated mounting in the window profile. The drive is equipped with microprocessor-controlled motor and synchronous electronic BSY+ for communication and sequential control in conjunction with D+H BSY+ window opening drives. For operating standard latch pane fittings in the window profile. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation. Drive functions and performance features are individually programmable via the D+H software SCS. VP signal of connected BSY+ opening actuators must be activated. Running and locking direction can be set via slide switch. A manual emergency release is possible with a special tool.   Technical data: Operating voltage: 24 V DC / ±20 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Contact load capacity: 2.5 A Locking force: 500 N Breakaway force: 1000 N * Service life: > 10000 cycles Locking stroke: 38 mm OPEN running speed: 3.3 mm/s OPEN running speed - SHEV: 4.2 mm/s CLOSED running speed: 3.3 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C **) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: V2A stainless steel Connection: 2.5 m silicone cable Dimensions (WxHxD): 493 x 25 x 25 mm   * Breakaway force in release position ** In accordance with VdS 2580   Scope of supply: Drive unit with 2.5 m silicone connection cable with plug adapter, fastening materials for integrated or mounted installation, instruction for use   Brand: D+H Mechatronic AG Type: VLD 51/038-BSY+   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.060.70 1.1.8 BSY+ linear lock drive - VLD-BSY+ - freely configurable 24 V DC / Special production according to customer requirements   Performance features: Electromotive drive unit for the integrated mounting in the window profile. The drive is equipped with microprocessor-controlled motor and synchronous electronic BSY+ for communication and sequential control in conjunction with D+H BSY+ window opening drives. For operating standard latch pane fittings in the window profile. Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation. Drive functions and performance features are individually programmable via the D+H software SCS. VP signal of connected BSY+ opening actuators must be activated. Running and locking direction can be set via slide switch. A manual emergency release is possible with a special tool.   Technical data: Operating voltage: 24 V DC / ±20 % Current consumption: 1 A Duty cycle: 30 % (ON: 3 min. / OFF: 7 min.) Contact load capacity: 2.5 A Locking force: 500 N Breakaway force: 1000 N * Service life: > 10000 cycles Locking stroke: on request OPEN running speed: 3.3 mm/s OPEN running speed - SHEV: 4.2 mm/s CLOSED running speed: 3.3 mm/s Type of protection: IP 50 Emission sound pressure level: LpA ≤ 70 dB(A) Temperature range: -15 °C (-5 °C **) till +75 °C Fire resistance: B300 (30 min / 300 °C) Housing: V2A stainless steel Colour: on request Connection: Silicone cable Dimensions (WxHxD): 493 x 25 x 25 mm   * Breakaway force in release position ** In accordance with VdS 2580   Scope of supply: Drive unit with silicone connection cable with plug adapter, fastening materials for integrated or mounted installation, instruction for use   Brand: D+H Mechatronic AG Type: VLD-BSY+   The D+H partner on site is at your disposal for design variants.   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.060.80 1.1.9 Extension functions VLD-BSY+ Option "special colour" -Colour coating for perfect integration into façade optics according to RAL, DB, NCS Unit : Stk 1.1.10 VLD-BS009-IM - for Raico® FRAME+ roof window VLD bracket set   Performance features: For mounted installation of the VLD drives ; Bracket set optimised for mounting on the window profile of the profile manufacturer: Raico® FRAME+ roof window;   Technical data: Material: V2A Stainless steel Surface: Barrel finished   Scope of supply: Bracket set including all necessary fasteners for the installation   Brand: D+H Mechatronic AG Type: VLD-BS009-IM   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.AFK.KS 1.1.11 VLD-BS010 VLD bracket set   Performance features: Mounting on the frame, For inward opening windows   Technical data: Material: Stainless steel V2A Colour: silver   Scope of supply: Bracket set including all necessary fasteners for the installation   Brand: D+H Mechatronic AG Type: VLD-BS010   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 24.AFK.KS 1.1.12 PI-VLD VLD bracket set for VLD 51/038   Brand: D+H Mechatronic AG Type: PI-VLD   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.066.10 1.1.13 RE-VLD VLD bracket set for VLD 51/038   Performance features: Installation on the frame; For inward opening windows; Min. space requirement on the frame: 40 mm; Min. space requirement on the sash: 30 mm;   Technical data: Material: V2A Stainless steel Colour: Silver   Brand: D+H Mechatronic AG Type: RE-VLD   Planning Support (https://www.dh-partner.com/int/en/service/planning-support) Unit : Stk Artikelnr. : 23.066.00