DXD series: capable rooftop specialist
Doing the heavy lifting on the roof – with precision
When it comes to lifting particularly heavy weights: The high-performance rack and pinion drives of the DXD Series open and close windows, flaps or domes powerfully, precisely and yet extremely quietly. The certified DXD drives from D+H are suitable both as natural smoke and heat exhaust ventilators (NSHEV) in case of fire, and for daily natural ventilation. Their motors can be controlled precisely and synchronized with other drives as necessary. Robust rack-and-pinion sets enable high pressure stability, regardless of whether the drive is being used as a force of pressure or tension application. In terms of stroke length too, the DXD Series goes above and beyond the average drive in enabling particularly wide openings. This allows toxic gases to escape quickly and be replaced by fresh air in the building.
-
Opens and closes even the heaviest roof openings in case of fire or for natural ventilation
-
BSY+ motor and synchronised electronics featuring microprocessor control
-
Powerful with a large stroke length: 3000 N at up to 1500 mm
-
NSHEV-certified in accordance with EN 12101-2
Technical features at a glance
-
Ideal for smoke exhaust openings and for daily natural ventilation
-
Up to 3000 N force of pressure and 2000 N tensile force
-
BSY+ motor and synchronised electronics, featuring microprocessor control, enables up to four drives in a synchronous group as well as customer-specific configuration of functions
-
High-speed (HS) function for opening of windows in case of fire
-
Flexible installation with sliding groove
-
Passive and active closing edge protection
-
Electronic limit switching and overload cut-off
Supply | 24 V DC / 230 V AC |
Force of pressure | 3000 N |
Tensile force | 2000 N |
Type of protection | IP 64 |
Stroke | 500 - 1500 mm |
- 24 V, 230 V
- High speed
- Natural ventilation, smoke extraction
- BSY+ technology